Describe the safety precautions
Industrial Safety Management
Multiple choices:
Q1. _____________is one of the weapons in the creative armoury available to managers.
a. Brainstorming
b. Hazard
c. Phosgene
d. Hazop
Q2. Which acid was the by-product of caustic soda manufacturing plant?
a. Folic acid
b. Hydrochloric acid
c. Sulphuric acid
d. Nitric acid
Q3. Which Step cannot be taken to isolate or block energy?
a. Block machine parts against motion that might result from gravity.
b. Disconnect or shutdown engines or motors that power mechanical systems.
c. Discharge capacitors by grounding.
d. De-energize electrical circuits by disconnecting power source from the circuit.
Q4. ____________are the outer particles of an atom they contain a negative charge.
a. Electric current
b. Electricity
c. Electron
d. None of these
Q5. This plan should provide for the orderly and phased shutdown of an installation.
a. Off-site emergency plan
b. On-site emergency plan
c. Safety Plan
d. Health Plan
Q6. MSDS stands for:-
a. Material Safety Data Sheet
b. Medical Safety Data Sheet
c. Material Solution Data Sheet
d. Material Security Data Sheet
Q7. The Xanthate is dissolved in dilute sodium hydroxide & the resulting solution is the viscous orange liquid known as
a. Spinning
b. Shredding
c. Viscose
d. Aging
Q8. ____________is used as a temporary care measure to provide the circulation of some oxygenated blood to the brain.
a. CPR
b. ECC
c. NEC
d. CFR
Q9. The SWL of a wire rope can be calculated by dividing
a. Ultimate Strength
b. Catalogue breaking load
c. Factor of safety
d .Ultimate breaking strength
Q10. Which gas is not used for the purpose of ventilation?
a. Carbon-di-oxide
b. Oxygen
c. Nitrogen
d. Hydrogen
Part Two
Q1. Describe the safety precautions in storing gas cylinders.
Q2. Write the advantages and disadvantages of „Electric Forks‟.
Q3. Explain the overview of the „Employer Safety Program‟?
Q4. What are the stages of „Brainstorming‟?
Caselet 1
Q1. What are your recommendations for prevention from these kinds of incidents?
Caselet 2
Q1. Prepare an investigation report on the basis of above case and suggest some points for prevention.
Q2. Describe the „Investigation Report‟ based on the “Layered Method”.
Q3. Explain the method of „Occupational Safety and Health Training‟?
Need Answer Sheet of this Question paper, contact
ARAVIND – 09901366442 – 09902787224
